Life detector device with seismic sensors
Leader SEARCH

Wireless and/or wired technology

A rescuer can connect up to 3 wireless sensors with a range of 100m in open field each, and up to 3 wired sensors with 8m of cable each.
These seismic sensors have been designed to detect the different sounds coming from the victims: scratching, hitting, screaming, etc.

Ergonomic control box

Lightweight and compact, Leader SEARCH control box is powered by a rechargeable battery with a life of 5 hours.
The control box screen has high brightness allowing to visualise the details in broad daylight.

Communication with buried victims

Leader SEARCH has a waterproof communication probe (IP67) equipped with 8m of cable to communicate with buried victims and assess what help is required.
Product features
Technical sheet
Associated products
Download

PRODUCT CHARACTERISTICS

Leader SEARCH is a life detection device used during rescue operations following disasters. The wireless or wired seismic sensors detect the signs of life (vibration detection) under the rubble and then locate the victims in a precise way.

It is possible to connect up to 6 seismic sensors to detect the different sounds coming from the victims: scratching, hitting, screaming, etc.

  • Connection of up to 3 wireless sensors with a range of over 100m each in open field.
  • Connection of up to 3 wired sensors with 8m of cable each.

Once the victim is located, the waterproof wired communication probe of LEADER Search allows dialogue with the victim to assess what help is required.

FUNCTIONS

Modes
Seismic monitoring (vibration)
Technology
Up to 3 wireless seismic sensors and 3 wired sensors
Features
Seismic monitoring: Individual control of each sensor from control box, Adjustable anti-noise filters (high-pitched/low-pitched noise filter), Mono or Stereo listening mode, Display of the detected signal, Tracers to help with the reading of the signal, Charge level.

CONTROL BOX

Dimensions
W 24 x H 15.2 x D 5.1 cm
Weight with battery
1.38 kg
Screen
TFT LCD, 7’’ - 800 x 480 px WVGA
Screen protection
Transparent thermoplastic
Control box water and dust resistance
IP54
Autonomy
2.5 h
Start time
<1 minute
Connections
Up to 2 headphones, Camera and Antenna
Wireless transmission
Antenna for interconnection of wireless seismic sensors (up to 100m in unobstructed space)
Memory card
Slot for micro SD card for recording photos and videos

CONTROL BOX BATTERY

Dimensions
W 6.5 x H 13 x D 3cm
Weight
280gr
Type
Lithium Ion Polymer. 37 Wh
Autonomy
2.5 h
Charging time
3.5 h
Recharging cycles
500
Compatibility
Interchangeable with LEADER Search, LEADER Cam and LEADER Scan
Spare battery pack
Supplied additionally for use when needed with 10 AAA batteries

POLE

-

CAMERA HEAD (ON POLE)

-

SENSOR(S)

Technology
Seismic Sensors
Type of connection to control box
Wireless (Proprietary format) for 3 sensors and Wired for the other 3
Number of interconnections
1 or 2 or 3 wireless sensors + 1 or 2 or 3 wired sensors
Range
Wireless sensor: 100m in unobstructed space
wired sensor: 8m of cable
Dimensions
Wireless sensor: H 212 mm with antenna x Diameter 90m
Wired sensor: H 85 mm x Diameter 90 mm
Weight
Wireless sensor: 690 g (without batteries)
Wired sensor: 1400 g with cable
Frequency
2.4 GHz
Water and dust resistance of sensors
IP67
Power supply
Wireless sensor: 3 AAA alkaline batteries - LR03
Wired sensor: Powered by the control box
Autonomy
Wireless sensor: Approx. 8 hours depending on battery brand
Wired sensor: Control box autonomy

NOISE-REDUCING HEADPHONES

Weight
430 g
Mono or Stereo
Stereo
Microphone
Built-in to communicate in search camera mode
NRR (Noise Reduction Rating) hearing protection
23 dB
Number of simultaneously connected pairs
2 pairs of headphones, one being optional

TRANSPORT CASE

Material
Rigid impact-resistant polypropylene shell
Transport
Suitable for air transport (integrated pressure equalising
valve)
Dimensions
W 65 x D 51 x H 24.2 cm
Empty weight
7 kg
Loaded case weight
26.5 kg
Water and dust resistance
IP67
Number of wheels
-
Internal protection
Device contained in a backpack ready to wear (to avoid the weight of the case)

FUNCTIONS

Modes
Seismic monitoring (vibration)
Technology
Up to 3 wireless seismic sensors and 3 wired sensors
Features
Seismic monitoring: Individual control of each sensor from control box, Adjustable anti-noise filters (high-pitched/low-pitched noise filter), Mono or Stereo listening mode, Display of the detected signal, Tracers to help with the reading of the signal, Charge level.

CONTROL BOX

Dimensions
W 24 x H 15.2 x D 5.1 cm
Weight with battery
1.38 kg
Screen
TFT LCD, 7’’ - 800 x 480 px WVGA
Screen protection
Transparent thermoplastic
Control box water and dust resistance
IP54
Autonomy
2.5 h
Start time
<1 minute
Connections
Up to 2 headphones, Camera and Antenna
Wireless transmission
Antenna for interconnection of wireless seismic sensors (up to 100m in unobstructed space)
Memory card
Slot for micro SD card for recording photos and videos

CONTROL BOX BATTERY

Dimensions
W 6.5 x H 13 x D 3cm
Weight
280gr
Type
Lithium Ion Polymer. 37 Wh
Autonomy
2.5 h
Charging time
3.5 h
Recharging cycles
500
Compatibility
Interchangeable with LEADER Search, LEADER Cam and LEADER Scan
Spare battery pack
Supplied additionally for use when needed with 10 AAA batteries

POLE

-

CAMERA HEAD (ON POLE)

-

SENSOR(S)

Technology
Seismic Sensors
Type of connection to control box
Wireless (Proprietary format) for 3 sensors and Wired for the other 3
Number of interconnections
1 or 2 or 3 wireless sensors + 1 or 2 or 3 wired sensors
Range
Wireless sensor: 100m in unobstructed space
wired sensor: 8m of cable
Dimensions
Wireless sensor: H 212 mm with antenna x Diameter 90m
Wired sensor: H 85 mm x Diameter 90 mm
Weight
Wireless sensor: 690 g (without batteries)
Wired sensor: 1400 g with cable
Frequency
2.4 GHz
Water and dust resistance of sensors
IP67
Power supply
Wireless sensor: 3 AAA alkaline batteries - LR03
Wired sensor: Powered by the control box
Autonomy
Wireless sensor: Approx. 8 hours depending on battery brand
Wired sensor: Control box autonomy

NOISE-REDUCING HEADPHONES

Weight
430 g
Mono or Stereo
Stereo
Microphone
Built-in to communicate in search camera mode
NRR (Noise Reduction Rating) hearing protection
23 dB
Number of simultaneously connected pairs
2 pairs of headphones, one being optional

TRANSPORT CASE

Material
Rigid impact-resistant polypropylene shell
Transport
Suitable for air transport (integrated pressure equalising
valve)
Dimensions
W 65 x D 51 x H 24.2 cm
Empty weight
7 kg
Loaded case weight
26.5 kg
Water and dust resistance
IP67
Number of wheels
-
Internal protection
Device contained in a backpack ready to wear (to avoid the weight of the case)

FUNCTIONS

Modes
Seismic monitoring (vibration)
Technology
Up to 3 wireless seismic sensors and 3 wired sensors
Features
Seismic monitoring: Individual control of each sensor from control box, Adjustable anti-noise filters (high-pitched/low-pitched noise filter), Mono or Stereo listening mode, Display of the detected signal, Tracers to help with the reading of the signal, Charge level.

CONTROL BOX

Dimensions
W 24 x H 15.2 x D 5.1 cm
Weight with battery
1.38 kg
Screen
TFT LCD, 7’’ - 800 x 480 px WVGA
Screen protection
Transparent thermoplastic
Control box water and dust resistance
IP54
Autonomy
2.5 h
Start time
<1 minute
Connections
Up to 2 headphones, Camera and Antenna
Wireless transmission
Antenna for interconnection of wireless seismic sensors (up to 100m in unobstructed space)
Memory card
Slot for micro SD card for recording photos and videos

CONTROL BOX BATTERY

Dimensions
W 6.5 x H 13 x D 3cm
Weight
280gr
Type
Lithium Ion Polymer. 37 Wh
Autonomy
2.5 h
Charging time
3.5 h
Recharging cycles
500
Compatibility
Interchangeable with LEADER Search, LEADER Cam and LEADER Scan
Spare battery pack
Supplied additionally for use when needed with 10 AAA batteries

POLE

-

CAMERA HEAD (ON POLE)

-

SENSOR(S)

Technology
Seismic Sensors
Type of connection to control box
Wireless (Proprietary format) for 3 sensors and Wired for the other 3
Number of interconnections
1 or 2 or 3 wireless sensors + 1 or 2 or 3 wired sensors
Range
Wireless sensor: 100m in unobstructed space
wired sensor: 8m of cable
Dimensions
Wireless sensor: H 212 mm with antenna x Diameter 90m
Wired sensor: H 85 mm x Diameter 90 mm
Weight
Wireless sensor: 690 g (without batteries)
Wired sensor: 1400 g with cable
Frequency
2.4 GHz
Water and dust resistance of sensors
IP67
Power supply
Wireless sensor: 3 AAA alkaline batteries - LR03
Wired sensor: Powered by the control box
Autonomy
Wireless sensor: Approx. 8 hours depending on battery brand
Wired sensor: Control box autonomy

NOISE-REDUCING HEADPHONES

Weight
430 g
Mono or Stereo
Stereo
Microphone
Built-in to communicate in search camera mode
NRR (Noise Reduction Rating) hearing protection
23 dB
Number of simultaneously connected pairs
2 pairs of headphones, one being optional

TRANSPORT CASE

Material
Rigid impact-resistant polypropylene shell
Transport
Suitable for air transport (integrated pressure equalising
valve)
Dimensions
W 65 x D 51 x H 24.2 cm
Empty weight
7 kg
Loaded case weight
26.5 kg
Water and dust resistance
IP67
Number of wheels
-
Internal protection
Device contained in a backpack ready to wear (to avoid the weight of the case)

FUNCTIONS

Modes
Seismic monitoring (vibration)
Technology
Up to 3 wireless seismic sensors and 3 wired sensors
Features
Seismic monitoring: Individual control of each sensor from control box, Adjustable anti-noise filters (high-pitched/low-pitched noise filter), Mono or Stereo listening mode, Display of the detected signal, Tracers to help with the reading of the signal, Charge level.

CONTROL BOX

Dimensions
W 24 x H 15.2 x D 5.1 cm
Weight with battery
1.38 kg
Screen
TFT LCD, 7’’ - 800 x 480 px WVGA
Screen protection
Transparent thermoplastic
Control box water and dust resistance
IP54
Autonomy
2.5 h
Start time
<1 minute
Connections
Up to 2 headphones, Camera and Antenna
Wireless transmission
Antenna for interconnection of wireless seismic sensors (up to 100m in unobstructed space)
Memory card
Slot for micro SD card for recording photos and videos

CONTROL BOX BATTERY

Dimensions
W 6.5 x H 13 x D 3cm
Weight
280gr
Type
Lithium Ion Polymer. 37 Wh
Autonomy
2.5 h
Charging time
3.5 h
Recharging cycles
500
Compatibility
Interchangeable with LEADER Search, LEADER Cam and LEADER Scan
Spare battery pack
Supplied additionally for use when needed with 10 AAA batteries

POLE

-

CAMERA HEAD (ON POLE)

-

SENSOR(S)

Technology
Seismic Sensors
Type of connection to control box
Wireless (Proprietary format) for 3 sensors and Wired for the other 3
Number of interconnections
1 or 2 or 3 wireless sensors + 1 or 2 or 3 wired sensors
Range
Wireless sensor: 100m in unobstructed space
wired sensor: 8m of cable
Dimensions
Wireless sensor: H 212 mm with antenna x Diameter 90m
Wired sensor: H 85 mm x Diameter 90 mm
Weight
Wireless sensor: 690 g (without batteries)
Wired sensor: 1400 g with cable
Frequency
2.4 GHz
Water and dust resistance of sensors
IP67
Power supply
Wireless sensor: 3 AAA alkaline batteries - LR03
Wired sensor: Powered by the control box
Autonomy
Wireless sensor: Approx. 8 hours depending on battery brand
Wired sensor: Control box autonomy

NOISE-REDUCING HEADPHONES

Weight
430 g
Mono or Stereo
Stereo
Microphone
Built-in to communicate in search camera mode
NRR (Noise Reduction Rating) hearing protection
23 dB
Number of simultaneously connected pairs
2 pairs of headphones, one being optional

TRANSPORT CASE

Material
Rigid impact-resistant polypropylene shell
Transport
Suitable for air transport (integrated pressure equalising
valve)
Dimensions
W 65 x D 51 x H 24.2 cm
Empty weight
7 kg
Loaded case weight
26.5 kg
Water and dust resistance
IP67
Number of wheels
-
Internal protection
Device contained in a backpack ready to wear (to avoid the weight of the case)

FUNCTIONS

Modes
Seismic monitoring (vibration)
Technology
Up to 3 wireless seismic sensors and 3 wired sensors
Features
Seismic monitoring: Individual control of each sensor from control box, Adjustable anti-noise filters (high-pitched/low-pitched noise filter), Mono or Stereo listening mode, Display of the detected signal, Tracers to help with the reading of the signal, Charge level.

CONTROL BOX

Dimensions
W 24 x H 15.2 x D 5.1 cm
Weight with battery
1.38 kg
Screen
TFT LCD, 7’’ - 800 x 480 px WVGA
Screen protection
Transparent thermoplastic
Control box water and dust resistance
IP54
Autonomy
2.5 h
Start time
<1 minute
Connections
Up to 2 headphones, Camera and Antenna
Wireless transmission
Antenna for interconnection of wireless seismic sensors (up to 100m in unobstructed space)
Memory card
Slot for micro SD card for recording photos and videos

CONTROL BOX BATTERY

Dimensions
W 6.5 x H 13 x D 3cm
Weight
280gr
Type
Lithium Ion Polymer. 37 Wh
Autonomy
2.5 h
Charging time
3.5 h
Recharging cycles
500
Compatibility
Interchangeable with LEADER Search, LEADER Cam and LEADER Scan
Spare battery pack
Supplied additionally for use when needed with 10 AAA batteries

POLE

-

CAMERA HEAD (ON POLE)

-

SENSOR(S)

Technology
Seismic Sensors
Type of connection to control box
Wireless (Proprietary format) for 3 sensors and Wired for the other 3
Number of interconnections
1 or 2 or 3 wireless sensors + 1 or 2 or 3 wired sensors
Range
Wireless sensor: 100m in unobstructed space
wired sensor: 8m of cable
Dimensions
Wireless sensor: H 212 mm with antenna x Diameter 90m
Wired sensor: H 85 mm x Diameter 90 mm
Weight
Wireless sensor: 690 g (without batteries)
Wired sensor: 1400 g with cable
Frequency
2.4 GHz
Water and dust resistance of sensors
IP67
Power supply
Wireless sensor: 3 AAA alkaline batteries - LR03
Wired sensor: Powered by the control box
Autonomy
Wireless sensor: Approx. 8 hours depending on battery brand
Wired sensor: Control box autonomy

NOISE-REDUCING HEADPHONES

Weight
430 g
Mono or Stereo
Stereo
Microphone
Built-in to communicate in search camera mode
NRR (Noise Reduction Rating) hearing protection
23 dB
Number of simultaneously connected pairs
2 pairs of headphones, one being optional

TRANSPORT CASE

Material
Rigid impact-resistant polypropylene shell
Transport
Suitable for air transport (integrated pressure equalising
valve)
Dimensions
W 65 x D 51 x H 24.2 cm
Empty weight
7 kg
Loaded case weight
26.5 kg
Water and dust resistance
IP67
Number of wheels
-
Internal protection
Device contained in a backpack ready to wear (to avoid the weight of the case)

FUNCTIONS

Modes
Seismic monitoring (vibration)
Technology
Up to 3 wireless seismic sensors and 3 wired sensors
Features
Seismic monitoring: Individual control of each sensor from control box, Adjustable anti-noise filters (high-pitched/low-pitched noise filter), Mono or Stereo listening mode, Display of the detected signal, Tracers to help with the reading of the signal, Charge level.

CONTROL BOX

Dimensions
W 24 x H 15.2 x D 5.1 cm
Weight with battery
1.38 kg
Screen
TFT LCD, 7’’ - 800 x 480 px WVGA
Screen protection
Transparent thermoplastic
Control box water and dust resistance
IP54
Autonomy
2.5 h
Start time
<1 minute
Connections
Up to 2 headphones, Camera and Antenna
Wireless transmission
Antenna for interconnection of wireless seismic sensors (up to 100m in unobstructed space)
Memory card
Slot for micro SD card for recording photos and videos

CONTROL BOX BATTERY

Dimensions
W 6.5 x H 13 x D 3cm
Weight
280gr
Type
Lithium Ion Polymer. 37 Wh
Autonomy
2.5 h
Charging time
3.5 h
Recharging cycles
500
Compatibility
Interchangeable with LEADER Search, LEADER Cam and LEADER Scan
Spare battery pack
Supplied additionally for use when needed with 10 AAA batteries

POLE

-

CAMERA HEAD (ON POLE)

-

SENSOR(S)

Technology
Seismic Sensors
Type of connection to control box
Wireless (Proprietary format) for 3 sensors and Wired for the other 3
Number of interconnections
1 or 2 or 3 wireless sensors + 1 or 2 or 3 wired sensors
Range
Wireless sensor: 100m in unobstructed space
wired sensor: 8m of cable
Dimensions
Wireless sensor: H 212 mm with antenna x Diameter 90m
Wired sensor: H 85 mm x Diameter 90 mm
Weight
Wireless sensor: 690 g (without batteries)
Wired sensor: 1400 g with cable
Frequency
2.4 GHz
Water and dust resistance of sensors
IP67
Power supply
Wireless sensor: 3 AAA alkaline batteries - LR03
Wired sensor: Powered by the control box
Autonomy
Wireless sensor: Approx. 8 hours depending on battery brand
Wired sensor: Control box autonomy

NOISE-REDUCING HEADPHONES

Weight
430 g
Mono or Stereo
Stereo
Microphone
Built-in to communicate in search camera mode
NRR (Noise Reduction Rating) hearing protection
23 dB
Number of simultaneously connected pairs
2 pairs of headphones, one being optional

TRANSPORT CASE

Material
Rigid impact-resistant polypropylene shell
Transport
Suitable for air transport (integrated pressure equalising
valve)
Dimensions
W 65 x D 51 x H 24.2 cm
Empty weight
7 kg
Loaded case weight
26.5 kg
Water and dust resistance
IP67
Number of wheels
-
Internal protection
Device contained in a backpack ready to wear (to avoid the weight of the case)

FUNCTIONS

Modes
Seismic monitoring (vibration)
Technology
Up to 3 wireless seismic sensors and 3 wired sensors
Features
Seismic monitoring: Individual control of each sensor from control box, Adjustable anti-noise filters (high-pitched/low-pitched noise filter), Mono or Stereo listening mode, Display of the detected signal, Tracers to help with the reading of the signal, Charge level.

CONTROL BOX

Dimensions
W 24 x H 15.2 x D 5.1 cm
Weight with battery
1.38 kg
Screen
TFT LCD, 7’’ - 800 x 480 px WVGA
Screen protection
Transparent thermoplastic
Control box water and dust resistance
IP54
Autonomy
2.5 h
Start time
<1 minute
Connections
Up to 2 headphones, Camera and Antenna
Wireless transmission
Antenna for interconnection of wireless seismic sensors (up to 100m in unobstructed space)
Memory card
Slot for micro SD card for recording photos and videos

CONTROL BOX BATTERY

Dimensions
W 6.5 x H 13 x D 3cm
Weight
280gr
Type
Lithium Ion Polymer. 37 Wh
Autonomy
2.5 h
Charging time
3.5 h
Recharging cycles
500
Compatibility
Interchangeable with LEADER Search, LEADER Cam and LEADER Scan
Spare battery pack
Supplied additionally for use when needed with 10 AAA batteries

POLE

-

CAMERA HEAD (ON POLE)

-

SENSOR(S)

Technology
Seismic Sensors
Type of connection to control box
Wireless (Proprietary format) for 3 sensors and Wired for the other 3
Number of interconnections
1 or 2 or 3 wireless sensors + 1 or 2 or 3 wired sensors
Range
Wireless sensor: 100m in unobstructed space
wired sensor: 8m of cable
Dimensions
Wireless sensor: H 212 mm with antenna x Diameter 90m
Wired sensor: H 85 mm x Diameter 90 mm
Weight
Wireless sensor: 690 g (without batteries)
Wired sensor: 1400 g with cable
Frequency
2.4 GHz
Water and dust resistance of sensors
IP67
Power supply
Wireless sensor: 3 AAA alkaline batteries - LR03
Wired sensor: Powered by the control box
Autonomy
Wireless sensor: Approx. 8 hours depending on battery brand
Wired sensor: Control box autonomy

NOISE-REDUCING HEADPHONES

Weight
430 g
Mono or Stereo
Stereo
Microphone
Built-in to communicate in search camera mode
NRR (Noise Reduction Rating) hearing protection
23 dB
Number of simultaneously connected pairs
2 pairs of headphones, one being optional

TRANSPORT CASE

Material
Rigid impact-resistant polypropylene shell
Transport
Suitable for air transport (integrated pressure equalising
valve)
Dimensions
W 65 x D 51 x H 24.2 cm
Empty weight
7 kg
Loaded case weight
26.5 kg
Water and dust resistance
IP67
Number of wheels
-
Internal protection
Device contained in a backpack ready to wear (to avoid the weight of the case)

FUNCTIONS

Modes
Seismic monitoring (vibration)
Technology
Up to 3 wireless seismic sensors and 3 wired sensors
Features
Seismic monitoring: Individual control of each sensor from control box, Adjustable anti-noise filters (high-pitched/low-pitched noise filter), Mono or Stereo listening mode, Display of the detected signal, Tracers to help with the reading of the signal, Charge level.

CONTROL BOX

Dimensions
W 24 x H 15.2 x D 5.1 cm
Weight with battery
1.38 kg
Screen
TFT LCD, 7’’ - 800 x 480 px WVGA
Screen protection
Transparent thermoplastic
Control box water and dust resistance
IP54
Autonomy
2.5 h
Start time
<1 minute
Connections
Up to 2 headphones, Camera and Antenna
Wireless transmission
Antenna for interconnection of wireless seismic sensors (up to 100m in unobstructed space)
Memory card
Slot for micro SD card for recording photos and videos

CONTROL BOX BATTERY

Dimensions
W 6.5 x H 13 x D 3cm
Weight
280gr
Type
Lithium Ion Polymer. 37 Wh
Autonomy
2.5 h
Charging time
3.5 h
Recharging cycles
500
Compatibility
Interchangeable with LEADER Search, LEADER Cam and LEADER Scan
Spare battery pack
Supplied additionally for use when needed with 10 AAA batteries

POLE

-

CAMERA HEAD (ON POLE)

-

SENSOR(S)

Technology
Seismic Sensors
Type of connection to control box
Wireless (Proprietary format) for 3 sensors and Wired for the other 3
Number of interconnections
1 or 2 or 3 wireless sensors + 1 or 2 or 3 wired sensors
Range
Wireless sensor: 100m in unobstructed space
wired sensor: 8m of cable
Dimensions
Wireless sensor: H 212 mm with antenna x Diameter 90m
Wired sensor: H 85 mm x Diameter 90 mm
Weight
Wireless sensor: 690 g (without batteries)
Wired sensor: 1400 g with cable
Frequency
2.4 GHz
Water and dust resistance of sensors
IP67
Power supply
Wireless sensor: 3 AAA alkaline batteries - LR03
Wired sensor: Powered by the control box
Autonomy
Wireless sensor: Approx. 8 hours depending on battery brand
Wired sensor: Control box autonomy

NOISE-REDUCING HEADPHONES

Weight
430 g
Mono or Stereo
Stereo
Microphone
Built-in to communicate in search camera mode
NRR (Noise Reduction Rating) hearing protection
23 dB
Number of simultaneously connected pairs
2 pairs of headphones, one being optional

TRANSPORT CASE

Material
Rigid impact-resistant polypropylene shell
Transport
Suitable for air transport (integrated pressure equalising
valve)
Dimensions
W 65 x D 51 x H 24.2 cm
Empty weight
7 kg
Loaded case weight
26.5 kg
Water and dust resistance
IP67
Number of wheels
-
Internal protection
Device contained in a backpack ready to wear (to avoid the weight of the case)

FUNCTIONS

Modes
Seismic monitoring (vibration)
Technology
Up to 3 wireless seismic sensors and 3 wired sensors
Features
Seismic monitoring: Individual control of each sensor from control box, Adjustable anti-noise filters (high-pitched/low-pitched noise filter), Mono or Stereo listening mode, Display of the detected signal, Tracers to help with the reading of the signal, Charge level.

CONTROL BOX

Dimensions
W 24 x H 15.2 x D 5.1 cm
Weight with battery
1.38 kg
Screen
TFT LCD, 7’’ - 800 x 480 px WVGA
Screen protection
Transparent thermoplastic
Control box water and dust resistance
IP54
Autonomy
2.5 h
Start time
<1 minute
Connections
Up to 2 headphones, Camera and Antenna
Wireless transmission
Antenna for interconnection of wireless seismic sensors (up to 100m in unobstructed space)
Memory card
Slot for micro SD card for recording photos and videos

CONTROL BOX BATTERY

Dimensions
W 6.5 x H 13 x D 3cm
Weight
280gr
Type
Lithium Ion Polymer. 37 Wh
Autonomy
2.5 h
Charging time
3.5 h
Recharging cycles
500
Compatibility
Interchangeable with LEADER Search, LEADER Cam and LEADER Scan
Spare battery pack
Supplied additionally for use when needed with 10 AAA batteries

POLE

-

CAMERA HEAD (ON POLE)

-

SENSOR(S)

Technology
Seismic Sensors
Type of connection to control box
Wireless (Proprietary format) for 3 sensors and Wired for the other 3
Number of interconnections
1 or 2 or 3 wireless sensors + 1 or 2 or 3 wired sensors
Range
Wireless sensor: 100m in unobstructed space
wired sensor: 8m of cable
Dimensions
Wireless sensor: H 212 mm with antenna x Diameter 90m
Wired sensor: H 85 mm x Diameter 90 mm
Weight
Wireless sensor: 690 g (without batteries)
Wired sensor: 1400 g with cable
Frequency
2.4 GHz
Water and dust resistance of sensors
IP67
Power supply
Wireless sensor: 3 AAA alkaline batteries - LR03
Wired sensor: Powered by the control box
Autonomy
Wireless sensor: Approx. 8 hours depending on battery brand
Wired sensor: Control box autonomy

NOISE-REDUCING HEADPHONES

Weight
430 g
Mono or Stereo
Stereo
Microphone
Built-in to communicate in search camera mode
NRR (Noise Reduction Rating) hearing protection
23 dB
Number of simultaneously connected pairs
2 pairs of headphones, one being optional

TRANSPORT CASE

Material
Rigid impact-resistant polypropylene shell
Transport
Suitable for air transport (integrated pressure equalising
valve)
Dimensions
W 65 x D 51 x H 24.2 cm
Empty weight
7 kg
Loaded case weight
26.5 kg
Water and dust resistance
IP67
Number of wheels
-
Internal protection
Device contained in a backpack ready to wear (to avoid the weight of the case)

DOWNLOAD

Product reference

 

Contact
Leader

If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.