Convertible monitor - 5,000 l/min
VECTOR 2

EN 15-767 certified

VECTOR 2 monitor complies with the requirements of the European standard EN 15-767.

Flow rate up to 5000 l/min

VECTOR 2 can provide a flow rate of 5,000 l/min.

Non-slip safety valve

In case of movement of the monitor (lifting and/or sliding), the safety valve will reduce but will not stop the flow rate in order to protect the firefighters while avoiding any excessive water hammer.

Protected pressure gauge

The pressure gauge is protected against shocks. It is fully integrated into the cast aluminium body of the monitor.
Product features
Technical sheet
Associated products
Download

PRODUCT CHARACTERISTICS

Powerful, VECTOR 2 monitor offers a flow rate of up to 5000 l/min.
Lightweight and compact, it can be transported and used anywhere.
Convertible, it can be installed on the vehicle roof. It consists of a clip-on turret on a baseplate of 4'' or 2x2.5''.

VECTOR 2 is equipped with a non-slip safety valve. This ensures the protection of the firefighters in the field in case of lifting and/or sliding of the monitor.

Very low maintenance due to its very robust design and materials used.

GENERAL CHARACTERISTICS

Weight
version 2x2.5'' - 22.7 kg
version 1x4'' - 20 kg
Flow rate
up to 5.000 l/min
Pressure
6 bar
|Available inlets
2.5" BSP F
2.5’’ BSP F
4’’ BSP M
Swivel
2x2.5’’ BSP F
4’’ BSP M
Material
cast aluminium body and stainless steel supports
Dimensions W x D x H
Retracted - 51 x 24 x 32cm
Extended - 65 x 65 x 52cm
Safety valve
yes
Pressure gauge protected
yes
Vertical elevation
up to 85° (from 25°)
Horizontal orientation
-120° to left and 80° to right
Oscillation
no
Convertible
yes (snap-on base turret)

GENERAL CHARACTERISTICS

Weight
version 2x2.5'' - 22.7 kg
version 1x4'' - 20 kg
Flow rate
up to 5.000 l/min
Pressure
6 bar
|Available inlets
2.5" BSP F
2.5’’ BSP F
4’’ BSP M
Swivel
2x2.5’’ BSP F
4’’ BSP M
Material
cast aluminium body and stainless steel supports
Dimensions W x D x H
Retracted - 51 x 24 x 32cm
Extended - 65 x 65 x 52cm
Safety valve
yes
Pressure gauge protected
yes
Vertical elevation
up to 85° (from 25°)
Horizontal orientation
-120° to left and 80° to right
Oscillation
no
Convertible
yes (snap-on base turret)

GENERAL CHARACTERISTICS

Weight
version 2x2.5'' - 22.7 kg
version 1x4'' - 20 kg
Flow rate
up to 5.000 l/min
Pressure
6 bar
|Available inlets
2.5" BSP F
2.5’’ BSP F
4’’ BSP M
Swivel
2x2.5’’ BSP F
4’’ BSP M
Material
cast aluminium body and stainless steel supports
Dimensions W x D x H
Retracted - 51 x 24 x 32cm
Extended - 65 x 65 x 52cm
Safety valve
yes
Pressure gauge protected
yes
Vertical elevation
up to 85° (from 25°)
Horizontal orientation
-120° to left and 80° to right
Oscillation
no
Convertible
yes (snap-on base turret)

GENERAL CHARACTERISTICS

Weight
version 2x2.5'' - 22.7 kg
version 1x4'' - 20 kg
Flow rate
up to 5.000 l/min
Pressure
6 bar
|Available inlets
2.5" BSP F
2.5’’ BSP F
4’’ BSP M
Swivel
2x2.5’’ BSP F
4’’ BSP M
Material
cast aluminium body and stainless steel supports
Dimensions W x D x H
Retracted - 51 x 24 x 32cm
Extended - 65 x 65 x 52cm
Safety valve
yes
Pressure gauge protected
yes
Vertical elevation
up to 85° (from 25°)
Horizontal orientation
-120° to left and 80° to right
Oscillation
no
Convertible
yes (snap-on base turret)

GENERAL CHARACTERISTICS

Weight
version 2x2.5'' - 22.7 kg
version 1x4'' - 20 kg
Flow rate
up to 5.000 l/min
Pressure
6 bar
|Available inlets
2.5" BSP F
2.5’’ BSP F
4’’ BSP M
Swivel
2x2.5’’ BSP F
4’’ BSP M
Material
cast aluminium body and stainless steel supports
Dimensions W x D x H
Retracted - 51 x 24 x 32cm
Extended - 65 x 65 x 52cm
Safety valve
yes
Pressure gauge protected
yes
Vertical elevation
up to 85° (from 25°)
Horizontal orientation
-120° to left and 80° to right
Oscillation
no
Convertible
yes (snap-on base turret)

GENERAL CHARACTERISTICS

Weight
version 2x2.5'' - 22.7 kg
version 1x4'' - 20 kg
Flow rate
up to 5.000 l/min
Pressure
6 bar
|Available inlets
2.5" BSP F
2.5’’ BSP F
4’’ BSP M
Swivel
2x2.5’’ BSP F
4’’ BSP M
Material
cast aluminium body and stainless steel supports
Dimensions W x D x H
Retracted - 51 x 24 x 32cm
Extended - 65 x 65 x 52cm
Safety valve
yes
Pressure gauge protected
yes
Vertical elevation
up to 85° (from 25°)
Horizontal orientation
-120° to left and 80° to right
Oscillation
no
Convertible
yes (snap-on base turret)

GENERAL CHARACTERISTICS

Weight
version 2x2.5'' - 22.7 kg
version 1x4'' - 20 kg
Flow rate
up to 5.000 l/min
Pressure
6 bar
|Available inlets
2.5" BSP F
2.5’’ BSP F
4’’ BSP M
Swivel
2x2.5’’ BSP F
4’’ BSP M
Material
cast aluminium body and stainless steel supports
Dimensions W x D x H
Retracted - 51 x 24 x 32cm
Extended - 65 x 65 x 52cm
Safety valve
yes
Pressure gauge protected
yes
Vertical elevation
up to 85° (from 25°)
Horizontal orientation
-120° to left and 80° to right
Oscillation
no
Convertible
yes (snap-on base turret)

GENERAL CHARACTERISTICS

Weight
version 2x2.5'' - 22.7 kg
version 1x4'' - 20 kg
Flow rate
up to 5.000 l/min
Pressure
6 bar
|Available inlets
2.5" BSP F
2.5’’ BSP F
4’’ BSP M
Swivel
2x2.5’’ BSP F
4’’ BSP M
Material
cast aluminium body and stainless steel supports
Dimensions W x D x H
Retracted - 51 x 24 x 32cm
Extended - 65 x 65 x 52cm
Safety valve
yes
Pressure gauge protected
yes
Vertical elevation
up to 85° (from 25°)
Horizontal orientation
-120° to left and 80° to right
Oscillation
no
Convertible
yes (snap-on base turret)

GENERAL CHARACTERISTICS

Weight
version 2x2.5'' - 22.7 kg
version 1x4'' - 20 kg
Flow rate
up to 5.000 l/min
Pressure
6 bar
|Available inlets
2.5" BSP F
2.5’’ BSP F
4’’ BSP M
Swivel
2x2.5’’ BSP F
4’’ BSP M
Material
cast aluminium body and stainless steel supports
Dimensions W x D x H
Retracted - 51 x 24 x 32cm
Extended - 65 x 65 x 52cm
Safety valve
yes
Pressure gauge protected
yes
Vertical elevation
up to 85° (from 25°)
Horizontal orientation
-120° to left and 80° to right
Oscillation
no
Convertible
yes (snap-on base turret)

DOWNLOAD

Attachment Size
DS_VECTOR_2_ZF.02.314.EN.1.pdf 618.79 KB

Product reference

 

Contact
Leader

If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.