Special nozzle
Inerting gas injected nozzle

Stainless steel body

Designed in stainless steel, LEADER inerting nozzles are projected to withstand foam concentrates, sea water, etc.

Allows to attack a fire from outside and safely.

Once a hole has been created in the wall of the volume on fire, using the pre-drilling hammer, the operator can introduce the nozzle inside the volume in order to cool and/or directly extinguish the fire.

2 models for more efficiency

A narrow jet model at 40° for an action inside the volume in length, and a spray jet model at 180°.
Product features
Technical sheet
Associated products
Download

PRODUCT CHARACTERISTICS

Inerting gas injected nozzle to extinguish a fire inside a closed space (container, roof, etc.) without having to open any door.

Made of 304 stainless steel, they are equipped with an inlet filter to prevent clogging of the spray nozzle and guarantee a jet of consistent quality.

GENERAL CHARACTERISTICS

Type
Single flow rate
Weight
1.3 kg
Available models
inerting nozzle narrow stream 90 l/min @ 6 bar
inerting nozzle narrow spray 90 l/min @ 6 bar
Dimensions W x D x H
1’’ = 64 x 9 x 9cm
Pressure
6 bar
Available inlets
1'' BSP F
Material
304 stainless steel
Size
N/A
Valve
nickel-plated brass ball valve
Bumper
N/A
Nominal pressure
16 bar
Special features
also available in 316 stainless steel

DOWNLOAD

Attachment Size
DS_Inerting_nozzle_ZF.01.011.EN.2.pdf 434.3 KB

Product reference

 

Contact
Leader

If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.