Selectable flow nozzle
MULTIFLOW Regular Aluminium

Stainless steel slide valve

Does not affect the perfect quality of jet even during a partial opening of the control flow handle.

Powerful full cone spray

Powerful narrow spray, composed of fine droplets propelled at high speed through machined teeth, ideal for smothering flames

Wide protective spray jet

Protective spray jet of over 120° for excellent protection against heat radiation.

Jet adjustment in 1/4 turn

Manual adjustment allows to go from a solid jet to a protective spray jet quickly.
Product features
Technical sheet
Associated products


The MULTIFLOW Regular nozzle with multiple flow rates was designed to better manage the water resources. Thus, with a sliding ring equipped with tactile markers, the MULTIFLOW nozzle allows the user to select the desired flow rate.

Designed in hard anodised aluminium, the MULTIFLOW Regular nozzle was tested in accordance with the salt spray test.


Selectable flow rate
2.4 kg
Available models
MultiFlow 400: 70 – 130 – 235 - 400 l/min at 6 bar 1.5'' BSP F
MultiFlow 400: 70 – 130 – 235 - 400 l/min at 6 bar 2'' BSP M
MultiFlow 500: 100 – 250 – 350 - 500 l/min at 6 bar 1.5'' BSP F
Dimensions W x D x H
1.5’’ = 30 x 13 x 25cm
2’’ = 31 x 13 x 25cm
6 bar
Available inlets
2'' BSP M
1.5'' BSP F
Hard anodised aluminium
stainless steel slide valve
Nominal pressure
16 bar

Product reference



If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.