Selectable flow nozzle
MULTIFLOW Large Aluminium

Stainless steel ball valve

Wear resistant when using charged water.

Polyurethane bumper

Polyurethane bumper for enhanced hydrocarbon resistance.

Unbreakable teeth moulded into the bumper

Moulded teeth in the bumper that help to absorb shocks in case of a fall.
Product features
Technical sheet
Associated products


MULTIFLOW Regular nozzle, with multiple flow rates, was designed to better manage the water resources. Thus, with a sliding ring equipped with tactile markers, the MULTIFLOW nozzle allows the user to select the desired flow rate.

Designed in hard anodised aluminium, the MULTIFLOW Large nozzle was tested in accordance with the salt spray test.


Selectable flow rate
3.35 kg
Available models
MultiFlow 1000: 300 – 500 – 750 - 1000 l/min at 6 bar 2.5'' BSP F
Dimensions W x D x H
1.5’’ = 35 x 13 x 26cm
6 bar
Available inlets
2.5'' BSP F
Hard anodised aluminium
stainless steel ball valve
Nominal pressure
16 bar

Product reference



If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.