Selectable flow nozzle
MULTIFLOW Compact Aluminium

High Pressure

Although EN15182-2 certified (PN16 nozzles), the compact nozzles also comply with the requirements of the standard on PN40 high-pressure nozzles.

Powerful narrow spray for attack

Ideal for smothering flames, the narrow spray of MULTIFLOW Compact is powerful, consisting of fine droplets propelled at high speed through machined teeth.

Slide valve

The stainless steel slide valve preserves a high quality stream during a partial opening of the nozzle.

Jet adjustment in a quarter turn

The adjustment of the jet angle makes it possible to pass from a solid jet to a protective spray jet very quickly.
Product features
Technical sheet
Associated products


Designed to limit the use of water, the MULTIFLOW Compact selectable flow nozzle allows the nozzle user to choose its flow rate for the operation. The slide valve allows a partial opening of the nozzle without deforming the jet.

Used with high pressure (PN40), compact nozzles retain their flexibility of use thanks to their slide valve.


Selectable flow rate
1’’ & 1.5’’ = 1.75 kg
1.85kg = 2’’
Available models
MultiFlow 150: 20 - 40 - 100 - 150 l/min @ 6 bar 2'' BSP M
MultiFlow 150: 20 - 40 - 100 - 150 l/min @ 6 bar 1'' BSP F
MultiFlow 235: 40 - 100 - 150 - 235 l/min @ 6 bar 2'' BSP M
MultiFlow 235: 40 - 100 - 150 - 235 l/min @ 6 bar 1'' BSP F
MultiFlow 400: 70 – 130 – 230 - 400 l/min @ 6 bar 2'' BSP M
Dimensions W x D x H
1 & 1.5’’ = 29 x 12 x 23cm
2’’ = 31.5 x 12 x 23cm
6 bar
Available inlets
2'' BSP M
1'' BSP F
Hard anodised aluminium
stainless steel slide valve
Nominal pressure
40 bar

Product reference



If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.