Multifunctional water/foam nozzle


TWIN-ACTION FiberTech nozzle is an adjustable flow rate nozzle with an integrated foam generator.

Adjustable flow rate

Flow rate and jet pattern are adjusted by rotating the head selector ring. Turning the head selector ring anticlockwise gradually, first it moves from the fully closed position to the 80 l/min straight jet position, then to 80 l/min attack jet (20°), then to 250 l/min straight jet, 250 l/min attack jet (60°) and 250 l/min spray jet (120°).


When the head selector ring is pushed backwards, the TWIN-ACTION is in the water position. When the ring is stretched forward, the nozzle is in the foam position.
Product features
Technical sheet


TWIN-ACTION FiberTech is a PN16 multifunctional water/foam nozzle. TWIN-ACTION nozzle incorporates a low expansion foam generator (10). No need to be equipped with a bulky removable foam adapter.

The ability to vary the flow rate (80 or 250 l/min) and the expansion, gives it superb versatility.
Its high-visibility foam head and its FiberTech body allow it to be the lightest water/foam nozzle on the market with only 1.5 kg.


Flow rate
80 and 250 l/min @ 6 bar
Operating pressure
6 bar
Available inlets
1.5'' BSP F or 2'' BSP M
Low = 10
Dimensions W x D x H
1.5’’ = 22 x 12 x 25cm
2’’ = 24 x 12 x 25cm
FiberTech composite
ball valve
Nominal pressure
16 bar
1.5 kg
DSP40 inlet coupling


Product reference



If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.