Automatic nozzle
FLOWMATIC Compact Aluminium

High Pressure nozzle

Although EN15182-2 certified (PN16 nozzles), the compact nozzles also comply with the requirements of the standard on PN40 high-pressure nozzles.

A powerful narrow spray for attack

Powerful full cone spray for smothering flames. It is composed of very fine drops propelled at high speed through metal fixed teeth.

Flow rate control by slide valve

Unlike the ball valve, the slide valve preserves a high quality stream during a partial opening of the nozzle.

From straight jet to protective jet in 1/4 turn

Design that allows going from a solid jet to a protective spray jet in just a quarter turn of the bumper.
Product features
Technical sheet
Associated products
Download

PRODUCT CHARACTERISTICS

Designed for unparalleled efficiency, the FLOWMATIC Compact nozzle has a pressure regulation system that optimises its range of action even in case of pressure drop, and allows the user to perform pulsing, starting at 2 bar.

The extremely easy-to-use flow control handle with slide valve, allows the user to vary the flow rate without producing jet deformation.

GENERAL CHARACTERISTICS

Type
Automatic
Weight
1’’ & 1.5’’ = 1.75 kg
1.85kg = 2’’
Available models
FlowMatic 150: 0 - 150 l/min @ 6 bar 1'' BSP F
FlowMatic 250: 0 - 250 l/min @ 6 bar 1'' BSP F
FlowMatic 400: 0 - 400 l/min @ 6 bar 1.5'' BSP F
FlowMatic 400: 0 - 400 l/min @ 6 bar 2'' BSP M
Dimensions W x D x H
1’’ & 1.5’’ = 29 x 12 x 23cm
2’’ = 31.5 x 12 x 23cm
Pressure
6 bar
Available inlets
2'' BSP M
1.5'' BSP F
1'' BSP F
Material
Hard anodised aluminium
Size
Compact
Valve
stainless steel slide valve
Bumper
polyurethane
Positions
6
Nominal pressure
40 bar
Special features
AA (Air Force) version available
flush position at bumper available

DOWNLOAD

Attachment Size
DS_COMPACT_FLOWMATIC_ZF.01.289.EN.2.pdf 745.26 KB

Product reference

 

Contact
Leader

If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.