NEO petrol-driven fan
MT236 - 52,550 m³/h
- Highly resistant propeller adapted to the power of the engine
- Red double-layer monobloc shroud made of reinforced high-density polyethylene
- High-tech composite grille
Positioning from 0.90 m to 6 m
Automatic tilt and stabiliser prop
The ability to withdraw the unit and tilt it to its maximum angle makes ventilation possible in these situations: Raised doors and windows, entrance steps, landings, etc.
In addition, it is equipped with a stabiliser prop at the rear, which also allows the fan to be tilted at -10° for downward ventilation (ventilation of semi-basements, for example).
Equipped with NEO technology, MT236 has a certified open air flow of 52,550 m³/h.
Robust, MT236 is equipped with LEADER monobloc shroud to reinforce the robustness of this part very exposed to shocks during fire operations.
Thanks to its automatic tilt and stabiliser prop, MT236 makes ventilation possible in these situations: raised doors and windows, entrance steps, landings or semi-basements.
- Open air flow
- 52,550 m³/h
- PPV flow rate according to AMCA 240
- 33,660 m³/h
- 39.6 kg
- Dimensions W x H x D
- 550 x 560 x 490 mm
- Propeller diameter
- 420 mm
- 2h10 at full speed
- HONDA GX 160 engine (4-stroke)
Automatic engine stop system in case of lack of oil
Assembly inspected and approved by Honda Motor Co., Ltd.
- Engine power
- 4.8 HP according to SAEJ1349 standard of 2007
- Noise level
- 93 dB at 3m
- Ventilation type
- PPV blowing
- Single door – houses, small buildings
Accessory that allows to channel the air or extract smoke during complex interventions.
Accessory to cool more quickly and efficiently.
Accessory to turn a fan into a high-expansion foam generator.
Accessory to determine the hours-run time of petrol-driven fans for maintenance purposes..
Accessory to expel the exhaust gases so as not to pollute the ventilated volume.
Those could interest you
With a weight of 20.3 kg, MT215 L NEO petrol-driven fan is the lightest in its class.
MT225 is LEADER entry-level fan.
With the same size and weight, MT240 is more powerful than MT236, with a flow rate of 68,300 m³/h.
A compromise between MT245 and MT296, MT280 is lighter than MT296 and more powerful than MT245.