NEO petrol-driven fan
MT225 - 41,950 m³/h

NEO technology

Equipped with NEO technology, MT225 petrol-driven fan produces a highly condensed and intense oval air jet thanks to an optimal combination:
  • Highly resistant propeller
  • Red double-layer monobloc shroud made of reinforced high-density polyethylene
  • High-tech composite grille

Accessible

Low-cost but very efficient, MT225 is LEADER entry-level fan.
Product features
Technical sheet
Associated products
Download

PRODUCT CHARACTERISTICS

Because it is not equipped with wheels or automatic tilting system, MT225 is the most affordable petrol-driven fan of LEADER.

UGAP-logoFind the product at UGAP website:MT225 NEO fan

GENERAL CHARACTERISTICS

Open air flow
41,950 m³/h
Weight
26.8 kg
Dimensions W x H x D
550 x 568 x 436 mm
Propeller diameter
420 mm
Autonomy
1h40 at full speed
Engine
HONDA GX 160 engine (4-stroke)
Automatic engine stop system in case of lack of oil
Assembly inspected and approved by Honda Motor Co., Ltd.
Engine power
4.8 HP according to SAEJ1349 standard of 2007
Noise level
94.8 dB at 3m
Ventilation type
PPV blowing
Application
Single door – houses, small buildings

DOWNLOAD

Attachment Size
DS_MT225_NEO_fan_ZCL03.265.EN.8.pdf 182.84 KB

Product reference

 

Contact
Leader

If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.