Hydraulic fans

The LEADER hydraulic fans can be used when the operational constraints require them. 
Their design guarantees excellent performance thanks to the combination of the latest technological developments by LEADER.
 
Powered by a hydraulic motor, they offer a flow of around 50,000 m3/h. 
The hydraulic motor has a DSP 65 connection with a regulation valve and shut-off valve as well as a pressure meter. 
At 10 bars, the motor consumes around 620 l/min and can also power an integrated mister. 

The two water-based fan models each use LEADER technologies. 

  • The EASY POW’AIR for the first, a technology which reinforces the air drive effect of turbo fans
  • For the second, the hydraulic fan has NEO technology.  This optimal combination of a highly resistant propeller and a composite material high-tech grille surrounded by a reinforced mono-block frame can offer unrivalled performance

The frame, equipped with two wide wheels to move the fan on soft ground, has an automatic tilting system, which guarantees it is always in the correct position! These features allow the firefighting hydraulic fan to be positioned at an ideal distance between 2 and 6 m from the opening, whilst conserving optimum performance. 

These firefighting fans can be equipped with several fans accessories such as a spiral backflow duct, a high expansion foam adapter, etc.
If these water-based fans needed to be used in cellars or car parks, it is possible to attach them to an accessory to allow a negative fan tilt (stand).

 

Contact
Leader

If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.