Extractor/Blower conversion kit
V-BOX

Extractor/Blower

By blowing, whether directly or through blowing ducts, LEADER electric fans (ES220, ES230, ESP230, ESV230) are used to introduce new air, cool a volume, expel toxic gases or smoke from the structure, and pressurise a volume, thereby preventing the smoke or gases from spreading. By extracting using dedicated accessories, LEADER electric fans (listed above) can extract toxic gases or smoke where the blowing technique is not suitable.

Fast and easy to use

V-BOX allows in a few seconds to convert a simple electric fan into a powerful smoke extractor for confined spaces (cellars, basements, etc.).

Usable with multiple ducts

V-BOX can be connected to several ducts (400 mm diameter) both upstream and downstream. It can also be fitted with a reducer to connect it to ZAG couplings (300 mm diameter).

Robust

Base reinforced with plastic skids allowing it to be dragged. It is also equipped with carrying handles for easier set-up.
Compare the product
Product features
Technical sheet
Associated products
Expertises
Download
  • Thumbnail Extractor-blower_conversion_kit_accessories_for_ventilation_confined_spaces.jpg
  • Thumbnail Extractor-blower_conversion_kit_accessories_for_ventilation_v-box.jpg
  • Thumbnail Extractor-blower_conversion_kit_accessories_for_ventilation_v-box_for_smoke_extraction.jpg
  • Thumbnail Extractor-blower_conversion_kit_accessories_for_ventilation_v-box_for_extraction.jpg

PRODUCT CHARACTERISTICS

V-BOX Extractor/Blower conversion kit allows to channel the air stream to ventilate confined spaces. Simply place the electric fan in the V-BOX, connect the ducts on either side of the latter, start the fan and close the V-BOX.

https://www.youtube.com/watch?v=HpaKI6LkZO0&t=0s&index=57&list=PLhwoX7Eb4JPdyQS30wYdtrAbRVexHKCNt

V-BOX - Extractor/Blower conversion kit for LEADER fans

V-BOX Extractor/Blower conversion kit for LEADER fans converts an electric fan into a powerful cold smoke extractor.

GENERAL CHARACTERISTICS

Material
Red Cube in Polyester and Polypropylene - with integrated rigid structure - Equipped with 2 male quick closures
Dimensions W x H x D
64 x 58 x 51cm
Weight
3.5kg

EXPERTISE

DOWNLOAD

Attachment Size
DS_ACCESSORIES_FANS_ZCL03.265.EN.9.pdf 545.38 KB

Product reference

Those could interest you

 

Contact
Leader

If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.