Venturi inductor / proportioner
LeaderMIX FIBERTECH 200 and 400

Wide concentration range

Thanks to its widely dimensioned dosing valve, LeaderMIX 200 or 400 offer the following possible concentrations: 0.1 – 0.25 – 0.5 – 1 – 2 – 3 – 4 – 5 or 6%.


Thanks to FiberTech Composite, LeaderMIX 200 or 400 weigh less than 2 kg (without coupling) and are therefore much lighter than most inductors which are often made of bronze.


LeaderMIX 200 or 400 inductors have a body made of FiberTech Composite. They are thus more resistant to foam concentrates and other chemical agents than inductors made of aluminium.
Product features
Technical sheet


LeaderMIX venturi inductors / proportioners made of FiberTech composite are available in 200 and 400 l/min and, thanks to FiberTech, they are very light. They offer a wide concentration range from 0.1% to 6% suitable for any type of foam concentrate.

These proportioners are designed for use at well-defined flow rates and pressures: do not confuse them with LeaderMIX 200-1000 which have a wide flow rate range.


Flow rate
200 l/min @ 10 bar
400 l/min @ 10 bar
Operating pressure
10 bar
0.1 – 0.25 – 0.5 – 1 – 2 – 3 – 4 – 5 or 6%
Inlet / Outlet
2'' BSP M
1.75kg without rod
3.2 with rod
Dimensions W x H x D
330 x 200 x 195 mm
Extraction tube
Extraction hose of 1.5m + plunger rod of 1m
DSP40 couplings



Product reference



If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.