Foam inductors

LEADER - firefighting equipment specialist and supplier - has developed innovative mechanical foam dosing systems for use on the move or integrated into firefighting response vehicles.

LEADER offers different types of foam dosing systems: 
 

  • the venturi foam eductor in Fibertech® composite: designed for uses at determined flows and pressure. 
    This foam proportioner is available as 200 and 400 l/min and thanks to Fibertech®, it is very light
    It offers a wide range of concentration from 0.1% to 6%, adapted to any type of foam

     

  • LEADER MIX 1000 and LEADERMIX 2000 autonomous automatic dosing systems: The ideal compromise between the classic venturi foam eductor and the classic electronic dosing system, they have a wide range of flows and concentration
    LEADER MIX systems are used to dose the foam concentrate precisely, from 5 bar and 0.3% to 6% with a flow range from 200 to 1000 l/min for LEADERMIX 200-1000 and from 300 to 2000 l/min for LEADER MIX 300-2000
    They need practically no maintenance except rinsing the foam after use
    They are completely autonomous and very simple to install in a vehicle or in fixed foam installation.

     

  • the FLOWMIX DSS system (the foam Dosing and Storage System): specially designed for Class A injection can dose from 20 l/min at just 0.1%.  The foam proportioner FLOWMIX only generates very low pressure loss compared with venturi foam proportioners. 
    Autonomous and available as a portable or vehicle mounted version, these dosing systems supply up to 2000 l/min of premix.

 

Do you know how the fire foam concentrates work?
Answer in the following article: Foam concentrates : how do they work ?

Why choose a 100% mechanical automatic foam inductor proportioner ?
You will find all the reasons at the following link! Proportioner / foam injector expertise.

 

Contact
Leader

If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.