Training fire extinguisher
CO2 type

Realistic and easy to set up

Unique on the market, the appearance and handling of this CO2 type training fire extinguisher are similar to those of a conventional fire extinguishers of 2 kg. Refillable in 5 minutes by the trainer with a compressor, it generates a jet that allows the trainees to confront the flames by positioning themselves correctly.

Visual and sound effects

The water supply (from 0.3L to 1L) is left at the trainer’s discretion to provide the following visual and sound effects:
  • With 0.3 L: CO₂ tone et mist - Approx. 15-20 sec duration
  • With 1 L: CO₂ tone et droplet spray - Approx. 10 sec duration

Economical and easy refill

The training fire extinguisher allows trainers to minimise training expenses. Refillable in less than 5 minutes, they use water to simulate the extinguishing agent. Compared to conventional fire extinguisher charging, it pays for itself in less than 7 refills!

Easy pressurisation

LEADER refillable training fire extinguishers are easy to pressurise using a foot pump (not included) or using a 15 bar compressor (not included)
Product features
Technical sheet


Essential equipment to complete the use of a flame generator during fire training, the refillable training extinguisher allows very concrete and practical training sessions at a lower cost. It helps avoid incorrect action or incorrect use.


Dimensions W x D x H
9 x 9 x 59 cm
5.1 kg
Tank maximum capacity
1 litre
Approx. 10 to 20 seconds (1 litre at 15 bar)


Attachment Size
DS_EXTINCTEURS_PP_PA_CO2_ZF04.216.EN.3.pdf 861.96 KB

Product reference



If you need any information or a quote, please complete the form opposite.

According to Article 36 of Chapter 5 of Law No. 78-17 of 6 January 1978 on data processing, files and freedoms: Personal data may not be stored for longer than the period provided for in Article 6(5) except for the purpose of processing for historical, statistical or scientific purposes; the choice of the data thus stored shall be made under the conditions provided for in Article L. 212-4 of the Heritage Code. Processing operations the purpose of which is limited to ensuring the long-term preservation of archival documents within the framework of Book II of the same Code shall be exempt from the formalities prior to the implementation of the processing operations provided for in Chapter IV of this Law. Processing may be carried out for purposes other than those mentioned in the first paragraph: - either with the express consent of the data subject; - or with the authorisation of the National Commission for Informatics and Liberties; - or under the conditions provided for in 8° of II and IV of Article 8 in the case of data mentioned in I of the same Article  

In accordance with the provisions of the RGPD and Law No. 78-17 of 6 January 1978 on data processing, files and freedoms, you retain the right to access and correct this information if you consider it necessary. You can also consult our legal notices and our privacy and data protection policy on this page.