Air/water recharging system for LEADER FILL-EX training extinguishers
Save time!
This air/water recharging system allows up to 3 training extinguishers to be recharged simultaneously without opening them. A real time-saver during your training sessions!
For use with Permanent Pressure extinguishers (PP) or auxiliary (PA):
- the 2 types (PA and PP) can be mixed when recharging
- CO2 extinguishers cannot be mixed with other types (PP and PA) during a refill cycle.
Practical
Space-saving, lightweight (less than 11 kg) and robust thanks to its stainless steel body, the "FILL-EX" reloading system consists of :
- a water inlet,
- a compressed air inlet,
- a control panel,
- 3 x 2m pneumatic spiral hoses with quick-release couplings.
Reliable in all circumstances
FILL-EX is a completely mechanical system with no electronics and an all-stainless steel casing.
Maintenance is reduced thanks to the robustness of the product and the materials used.
Product features
Technical sheet
Download
The air/water recharging system for LEADER FILL-EX training extinguishers means you can recharge up to 3 training extinguishers simultaneously without opening them!
A real time-saver during your training sessions!
No need to open the extinguishers, so less risk of damaging the seals! "FILL-EX" reloading system consists of :
- a water inlet,
- a compressed air inlet,
- a control panel,
- 3 x 2m pneumatic spiral hoses with quick-release couplings.
GENERAL CHARACTERISTICS
- Dimensions
- H270 x L410 x P330mm
- Weight
- 10.5kg
- IP
- IP65
- Hoses
- 2m spiral with brass fittings
- Power supply
- 15bar air compressor (not included)
- Mains water at minimum 3 bar (connector supplied / hose not included)
- Operating temperature
- -0°C to +50°C
- Guarantee
- 2 years
Associated products
TELECHARGEMENT
| Attachment | Size |
|---|---|
| DS_FILL-EX_ZF.04.423.GB.1.pdf | 682.41 KB |
Product reference
Those could interest you
Description
To train and practice the use of a permanent pressure fire extinguisher for class A and B fires.
Description
To train and practice the use of an auxiliary pressure fire extinguisher with firing pin.
Description
To train and practice the use of a CO2 fire extinguisher for class B and E fires.